How To Clear A Lead Pipe Drain

How To Clear A Lead Pipe Drain

This blog post will teach you how to clear a lead pipe drain. Follow these simple steps and you should be able to unblock your drain in no time.

Lead Drain Pipe Repair Made Simple

The Benefits of Clearing a Lead Pipe Drain

Lead pipe damage is one of the most common home plumbing problems. The cause of the damage can be many things, but the most common is a clogged drain. When the drain becomes blocked, water can’t flow properly and can start to accumulate. This can lead to a lot of damage, and in some cases, a full-blown flood.

There are several ways to clear a lead pipe drain.

The most common way to clear a lead pipe drain is to use a plunger. Plungers have a large, concave surface that pushes and pulls on the drain. This forces the water out of the pipe and eventually down the drain.

Another way to clear a lead pipe drain is to use a drain auger. Drain augers have a small, sharp blade that slips down the drain. The blade cuts through the blockage and allows the water to flow freely.

If a lead pipe is completely blocked, you may need to call a professional. A professional will be able to clear the pipe and prevent any damage from happening.

The Risks of Not Clearing a Lead Pipe Drain

If you don’t clear a lead pipe drain, there is a risk of lead poisoning. Lead can build up in the water supply if the pipe is not cleared. This can cause health problems for people who drink the water, or for children who play in the water.

See also  How To Clear A Clogged Drain Pipe

The Tools You’ll Need to Clear a Lead Pipe Drain

The following are the tools you will need to clear a lead pipe drain:

  • Towel
  • Bucket or pan
  • Stick or pole
  • Hammer
  • Pipe cleaner
  • Jumper cables
  • Socket set
  • Wire stripper
  • Lug wrench
  • Screwdriver
  • Pliers
  • Pipe cleaner wands
  • Rags

    1. Locate the lead pipe that is clogged. It is typically located near the water heater, the sink, or the drain in the basement.

    2. Remove any debris that may be blocking the lead pipe. This includes leaves, branches, and dirt.

    3. If the lead pipe is exposed, use a stick or pole to poke around the inside to see if any foreign objects are wedged in the pipe. If so, use a hammer and a pipe cleaner to dislodge them.

    4. If the lead pipe is concealed, use a lug wrench to unscrew the cold water supply pipe from the main water line. This will allow you to access the lead pipe.

    5. Use a socket set to remove the lead pipe from the wall. Be careful not to pinch your fingers!

    6. If the lead pipe is encased in concrete, use a pliers to remove the screws that hold the pipe in place.

    7. Use a

The Steps to Clearing a Lead Pipe Drain

  1. Read the safety warnings on the lead pipe. There may be specific instructions on how to clear the lead pipe in case of an emergency.

    2. If you don’t have the proper equipment, get it. You likely won’t need a blowtorch, but a socket set, plumbers snake, and bucket are all necessary.

    3. Make sure the area around the lead pipe is clear. This means clearing away any debris and any materials that could block the flow of water.

    4. Turn on the water to the drainage system. The water will help push the debris and material out of the way.

    5. Use the socket set to remove the lead pipe from the ground. Be careful not to puncture it.

    6. Use the plumbers snake to clear the pipe of any obstruction.

    7. Use the bucket to scoop up any material that has been dislodged.

    8. Turn off the water to the drainage system and remove the lead pipe from the area.

What to Do if You Can’t Clear a Lead Pipe Drain

If you can’t clear the drain using the steps outlined below, it may be necessary to call a professional plumber.

1. Try using a plunger.

2. If that doesn’t work, try using a bucket and a plunger.

3. If that still doesn’t work, call a professional plumber.

When to Call a Plumber to Clear Your Lead Pipe Drain

If you have a lead pipe drainage problem and don’t know how to clear it yourself, it’s time to call a professional. A lead pipe can become blocked for many reasons, including tree roots and snow buildup. When this happens water can backs up and damage your home.

There are a few things you can do to try and clear a lead pipe on your own, but it’s always best to call a professional. Here are a few tips to help you get started:

– Clear the area around the pipe. This includes removing snow and debris and free up any obstructions.

– Use a plunger. Place the plunger at the top of the pipe and use the suction to push the water down the pipe.

– Use a bucket. Fill the bucket with water and place it at the bottom of the pipe. Use the plunger to push the water up the pipe and out of the bucket.

– Use a snake. Cut a hole in the bottom of a bucket and insert the snake. Wrap the snake’s tail around the bucket and use the fingers on the other hand to pry the snake up and out of the hole.

– Call a professional. A qualified plumber can clear the blockage and prevent further damage to your home.


Clearing a lead pipe drain can be a difficult and time-consuming process, but it is essential to prevent a potential water emergency. If you notice water accumulating in your sink or bathtub, contact a professional to clear your pipe.

See also  How To Clear A Pond Drain Pipe

Leave a Comment

Your email address will not be published. Required fields are marked *