How To Clean Out A Clothes Washer Drain Pipe

How To Clean Out A Clothes Washer Drain Pipe

If you have a clothes washer that drains into the sink, it’s important to clean out the drain pipe regularly to prevent clogs and backups. Follow these steps to clean out your clothes washer drain pipe:

1. Open the drain valve on the clothes washer.
2. Pour a bucket of cold water down the drain pipe.
3. Use a plunger to suction onto the clogged section of the drain pipe and pull.
4. Repeat steps 2 and 3 until the clog is cleared.
5. Close the drain valve and wait 10 minutes for the water to clear before turning on the clothes washer.

Clean internal drain hose to help eliminate Front and Top Load Washer odor

Cleaning your clothes washer drain pipe

There is nothing quite as frustrating as trying to get your clothes clean only to have water and soap spilling all over the floor and even worse, the clothes machine itself.

See also  How To Clean A Smelly Drain Pipes

It’s not always easy to tell if your clothes washer drain pipe needs cleaning, but if the water is constantly overflowing or if the drain pipe becomes blocked, it’s time to take action.

1. Unplug the clothes washer.

  1. Locate the drain pipe.
  2. Open the supply line to the drain pipe by unscrewing the hose connector.
  3. Gently remove any clogs or debris from the drain pipe with a plunger.
  4. Pour a healthy dose of vinegar down the drain pipe.
  5. Replace the supply line to the drain pipe and screw on the hose connector.
  6. Plug in the clothes washer and start washing your clothes!

Disconnect your washer from the water supply.
Unscrew the drain pipe from the washer.
Clean out the drain pipe with a wire brush.
reattach the drain pipe to the washer.
Turn on the water supply to the washer.
Run a cycle to test

  1. Disconnect your washer from the water supply.
  2. Unscrew the drain pipe from the washer.
  3. Clean out the drain pipe with a wire brush.
  4. Reattach the drain pipe to the washer.
  5. Turn on the water supply to the washer.
  6. Run a cycle to test.

Conclusion

If your clothes washer is not draining properly, there may be something blocking the drain. Follow these simple steps to clean out the clothes washer drain pipe: 1. Unplug the washer and disconnect the water supply. 2. Locate and remove the drain hose from the washer. 3. Clear the obstructions from the drain pipe with a plunger. 4. Install the drain hose back into the washer and connect the water supply. 5. Run the washer using the full flow of water to clear any debris from the drain pipe.

See also  How To Clean Out A Drain Pipe With A Snake

Leave a Comment

Your email address will not be published. Required fields are marked *